Laser cleaning of turbines
Part of the renovation of steam turbines is the complete removal of dirt from their surfaces. Using a powerful pulsed laser, cleaning is very effective, all […]
Renovation of a staircase in an apartment building in the center of Prague
Renovation of a staircase in an apartment building in the center of Prague. An apartment building in the center of Prague underwent a complete renovation, all that remained was to renovate the historic cast iron staircase.
Brick facade renovation
The historic villa was originally built as the residence of a brick factory owner. The quality of the bricks is still appreciated by builders in the surrounding area.
Condensation chambers
The environment of condensation chambers in power plants is very corrosive due to high temperatures and humidity, and steel and cast steel surfaces are deeply corroded.
Renovation of brass fittings
The brass fittings of the historic oak doors were heavily oxidized (the alloy contained a high percentage of copper) and had been repeatedly painted. Under the cover strips was
Renovation of the cast iron posts of the historic railing
More than 150 pieces of historic cast iron columns were carefully renovated in accordance with the requirements of conservationists. Using a pulsed laser, they were removed
Cleaning of heat exchangers
Cleaning of heat exchanger plates – organic and inorganic deposits occur on the stainless steel plates of heat exchangers, which reduce the flow of liquids
A marl fence in Kumpán's garden
The marl entrance gate of Kumpán's Garden in Slané has been renovated so far. Since its inception, the surface has been heavily polluted, which was in contrast
Cleaning of injection molds
Injection mold cleaning is an optimal application for pulsed lasers. All residues of various polymers can be removed without contact
Cleaning of cutting lasers
The base surface for cutting small textile elements in some cutting lasers consists of aluminum profiles with holes for vacuum attachment of the cut
Historic water tank
Removing coarse rust from a steel water tank – a riveted water tank from the century before last was already rusted.
Renovation of copper alloys
Brass and bronze are copper alloys used for a variety of decorative and functional items. According to the type and content of other elements in
Renovation of the historic railing
The historic railing inside the building in the center of Prague, on Na Příkopě Street, was largely original and protected as a monument. The steel structure was of very high quality.
Renovation of studs with round threads
Round threads are used where extreme loads are expected and where there are severe corrosion conditions and heavy contamination. Likewise
Renovation of the bronze plaque
Skanska approached us with a request to renovate a commemorative bronze plaque that should be displayed in the Emila District.
BMW Marco Zakouřila
Marco Zakouřila's BMW M2 racing car has extreme performance and very high demands are placed on the chassis. The production of individual components
Phoenix Palace - staircase
The Fenix Palace on Wenceslas Square has two main entrances, one of which is formed by a granite staircase. Roughened granite surface
Renovation of the fencing around the athletic field
When renovating steel structures, we combine powerful pulsed lasers with mobile blasting. In interiors, near buildings and other places where pollution is undesirable
Cleaning an air-cooled engine from a Porsche 911
Some cars are nice, some less so, some are fascinating even when you look under the hood. We haven't cleaned like this in a long time.
Small hydropower plants
Removal of old paint, rust and mineral oil residues from fixed steel structures. Combination of mechanical removal of dirt with laser cleaning with the condition
Laser removal of fumes from stainless steel cookware
When cooking on gas burners, deposits form on cooler surfaces that are not easy to remove. Mechanical removal is quite laborious and requires brushing or