Renovation of cast iron radiators
We usually renovate cast iron radiators by blasting and subsequent spraying. However, there is a risk of damage to the seals between the individual fins during transport and subsequent leakage. […]
We usually renovate cast iron radiators by blasting and subsequent spraying. However, there is a risk of damage to the seals between the individual fins during transport and subsequent leakage. […]
Laser removal of organic deposits and old paints from the cast steel structure of a waterworks using the ROD 1000 laser. From submerged steel surfaces
Road markings can be removed using several technologies, primarily grinding or high-pressure water jetting. However, both of these technologies are associated with significant
After a long time, we were happy to clean the engine, this time on a Czechoslovak coupe from the 80s – the Škoda Garde. The engine had silver-painted valve covers.
After several years of operation, the tiled walls of car washes become dirty. The dirt is usually inert to washing with detergents and pressure washers.
Combination of laser cleaning with chemical cleaning – after several years the tiles in the restaurant were contaminated with rust, which over time leaked from the metal legs of the tables.
When renovating an old Jawa, the owner hesitated between removing the paint by blasting or laser. In the end, we took this option and compared both.
Laser cleaning of steering parts on a quad bike. The individual parts were heavily contaminated with rust, oil, dust and sawdust after improper
Laser engine cleaning on a 1st generation Ford Transit. We used a pulsed laser to remove oil and dust deposits, occasional rust on steel parts
Laser cleaning of the gearbox on a two-speed VW Golf – removal of grease and dust without the risk of damaging the seals and electrical connector. Implementation on
Laser stone cleaning – the surface of the marl stone wall, dating back to the 1920s, was in very good condition, however, due to atmospheric